Automobile parts grinding
HOME　Products introduction

Wet and Bottom type Deburring machine SSF201 (Under patentapplication)
・Recommendable for deburring of convexed parts
(backside of convexed surface)
■Features:
Our SSF201 is Bottom type wet belt grinder for deburring
the convexed parts made by fine blanking press.
Stable feeding can be achieved thanks to the special feeding
belt and feeding method
・A pain is just in a blink away ! Machine setup within 30 sec.
　thanks to quick release tools
・Compact design and high-speed operation 　suitable for line use
・Equipped with magnetic separation type filtering device for
　grinding fluid circulation



Specifications
Model SSF201
Max. workable width
150 mm
Min. workable size
40 mm
Grinding method
Bottom / Wet / Belt grinding
No. of grinding head
1
Grinding speed
200〜600 m/min
Feeding speed
3〜12 m/min
Grinding belt size
200 x 1900 mm
Machine size (L x W x H)
1400 x 1400 x 1707 mm


Newly-developed Model SFC-20D Abrasive belt grinder

Minimum workable length 90mm
・Ideal suited for grinding automobile parts such as a clutch plate
・Available also for grinding a small sized parts (100mm diameter or more)
・Precise thickness control
・Equipped with anti-wear plates on the table
・Easy replacement of a grinding tool
・Lower investment type.

Specifications
Model SFC20D
Max. workable size (WxTxL)
100mm-180mm dia. x1.0mm-10.0mm
Feeding speed
4-10m/min.
Grinding speed
500-700m/min.
Grinding direction
Up

SS Series : Model SS-20/30 Abrasive belt grinder

・Ideal suited for precisely grinding a steel plate, especially automobile parts
・1-head, 2-head, 3-head, 4-head type available.--- applicable for various
　grinding requirement
・ Equipped with coolant oil circulation system with magnetic separator



Specifications
Model SS201
Model SS301
Max. workable size (WxT)
190mmx99mm
300mm x 99mm
Min. workable length
230mm
230mm
Feeding speed
2.5-10m/min. (50Hz)
25 -10m/min. (50Hz)
Grinding speed
1200m/min.
1200m/min.
Grinding direction
Up/Down
Up/Down
* 2-head, 3-head, 4-head type also available.

Model SRK Abrasive belt grinder
・Ideal suited for grinding a steel plate, such as a clutch plate for automobile
・Available for shorter workpiece
・Table fixed type
・Dry grinding type


Specifications
Model SRK30D (1-Head)
Model SRK30DD (2-Head)
Max. workable size (WxT)
300mmx150mm
300mmx150mm
Min. workable length
160mm
160mm
Grinding speed
1200m/min.
1200m/min.
Feeding speed
3-11m/min. (50Hz)
3 -11m/min. (50Hz)